Color steel plate is more common in our daily life, it involves many fields, such as factory buildings, plank houses, etc. color steel plate has been widely used in society because of its special material and high recovery rate. With the development of the times, more and more color steel plates are used, so you need to observe those items when you buy to buy high-quality products Products. Follow the color steel plate manufacturers to learn about it.

Jinan color steel plate

1、要觀察基底的厚度和涂層的厚度

1. Observe the thickness of the substrate and the thickness of the coating

彩鋼板是由基材和彩色腹膜或涂層組成。我們一定要考慮的是基底和腹膜涂層的厚度。彩色鋼板的優選基材為0.02 -0.05毫米，而涂膜或鍍層的厚度通常僅為0.15毫米或者是更小。因?yàn)閺挠绊懖输摪迨褂脡勖慕嵌葋砜矗牡暮穸纫彩欠浅Ｖ匾摹Ｒ恍┎输摪宓闹圃焐探?jīng)常對基材和彩鋼板進行涂覆或涂膜。它們減少了基底的厚度，但增加了腹膜的厚度，并降低了彩色鋼板的生產成本，從而大大減少了彩色鋼板的使用年限

Color steel plate is composed of substrate and color peritoneum or coating. The first thing we have to consider is the thickness of the substrate and peritoneum. The preferred substrate of color steel plate is 0.02-0.05 mm, while the thickness of coating or coating is usually only 0.15 mm or less. Because from the perspective of affecting the service life of color steel plate, the thickness of base material is also very important. Some color steel plate manufacturers often coat or film the substrate and color steel plate. They reduce the thickness of the substrate, but increase the thickness of the peritoneum, and reduce the production cost of the color plate, thus greatly reducing the service life of the color plate

2.觀察彩鋼板的漏邊

2. Observe the leakage of color steel plate

拿一塊彩鋼板，觀察彩鋼板的外露部分是否有細小的晶體、灰色、深色和雜質。如果切割面是細粒的，質量相對較好。

Take a color steel plate, first observe whether there are small crystals, gray, dark color and impurities in the exposed part of the color steel plate. If the cutting surface is fine, the quality is relatively good.

3.聽聽聲音

3. Listen to the voice

用手指或硬物輕敲彩色鋼板。如果彩鋼板材質差，聲音單調，金屬聲不明顯，材質較好的彩鋼板的金屬聲比較響亮。

Tap the colored steel plate with fingers or hard objects. If the color steel plate material is poor, the sound is monotonous, and the metal sound is not obvious, the metal sound of the color steel plate with better material is louder.

4:檢查彩鋼板的質量證明

4: Check the quality certificate of color steel plate

相關部門是否有檢驗標準。如果可能的話，你可以當場拜訪彩鋼板制造商。看看公司的環境，看看是否正式。詢問公司在市場上的聲譽。

Whether the relevant departments have inspection standards. If possible, you can visit the color plate manufacturer on the spot. Look at the company's environment and see if it's formal. Ask about the company's reputation in the market.

5:看

5: Look at the price

當我們比較彩色鋼板的質量時，是一回事，但我們不應該太注意。如果彩鋼板比其他鋼板低很多，我們是要應該注意。

When we compare the quality of color steel plates, the price is one thing, but we should not pay too much attention to the price. If the price of color steel plate is much lower than other steel plates, we should pay attention to it.

以上內容就是彩鋼板廠家給大家所分享在選購時如何去判斷彩鋼板的質量，通過以上內容的了解大家是不是都能分辨彩鋼板質量的好壞了呢?

The above content is the color steel plate manufacturers to share with you, how to judge the quality of color steel plate when purchasing, through the understanding of the above content, can we all distinguish the quality of color steel plate?